Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Longwood, FL
Gate installation in Longwood typically runs $1,800 to $7,500 depending on whether it’s a manual driveway gate or a fully automated system with safety loops and remotes. What makes Longwood different from nearby cities is the mix: 1970s ranch homes on oversized lots that have never had a gate, and gated communities like Alaqua Lakes where HOA standards dictate materials and design. Villa Gate Repair handles both ends of that spectrum, and everything in between. Call (877) 265-5090 for a free measure and written estimate.
Why Longwood Homes Are Different
Longwood’s gate work runs two distinct directions, and we see both every week. The older ranch homes along State Road 434 and around Sabal Point often sit on half-acre lots where a gate was never part of the original build. When those homeowners decide to add one, the job usually starts with the post footings, not the gate itself, because mature oak roots and sandy Florida soil undermine concrete over time. The gate must also clear a driveway that may have settled unevenly since the 1980s.
At the opposite end, communities like Alaqua Lakes and Wingfield have gates that were installed with the house, often decorative steel or aluminum with automatic operators. Those jobs are governed by HOA architectural committees that expect repairs to match existing finishes exactly, down to the powder coat color and panel style. Longwood’s humidity accelerates rust on any unpainted or scratched metal surface, and the summer thunderstorm pattern means lightning strikes fry control boards more often than we see in Sanford or Lake Mary, where elevation and drainage differ slightly. The practical result: Longwood homeowners need a gate company that can pour a solid footing, fabricate a matching panel, and diagnose a surge-damaged circuit board without subbing any of it out.
Styles & brands we work with
Our Main Longwood Services
Most calls from Longwood homeowners fall into two categories: a gate that won’t open or close, and a gate that needs to exist but doesn’t yet. Here’s what each job looks like in this city specifically.
Gate Repair in Longwood
A gate that drags on the driveway or hangs off its hinges is usually mechanical: corroded hinges, a sagging post, or a bent track from years of Longwood’s storm cycles. On older properties, we often find the original gate was hung on a post set without enough concrete, and the whole assembly has to be re-set. In the gated communities, repair usually means matching the existing hardware closely enough to pass architectural review. Gate Repair in Longwood is the resource for what we fix and what it costs.
Electric Gate Repair in Longwood
When a gate stops mid-cycle, ignores the remote, or reverses without a reason, the problem is usually electrical: a surge-damaged control board, a wet safety loop, or a motor capacitor that’s failed from heat and humidity. Longwood’s frequent lightning makes surge protection a recurring conversation here, and many of the automatic systems in Alaqua Lakes and Wingfield run on older frequency remotes that are vulnerable to interference. Electric Gate Repair in Longwood covers motors, control boards, sensors, and remote problems in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Longwood
New gate installation in Longwood means building for Florida soil and Florida storms, not just bolting panels to posts. On the older ranch lots, we’re usually adding a gate to a driveway that was poured decades ago and never designed for one, which changes how we set posts and route power. In the HOA communities like Wingfield and Alaqua Lakes, the gate has to meet the association’s material and height specs before the first hole is dug. Our full Gate Installation service covers design, permitting help where needed, concrete work, and the automation system, so the gate works on day one and matches the property.
Automatic Gate Installation
Signs you need it
You want the gate to open from the car without getting out, or your property would benefit from controlled access that a manual gate can’t provide.
What it costs in Longwood
Automatic gate installation in Longwood typically runs $3,200 to $7,500, with the operator and safety loops accounting for most of the spread.
How we do it
We survey the driveway slope and gate weight, set the posts, hang the gate, install the operator arm or slide mechanism, wire the control board, and program remotes and safety loops.
Driveway Gate Installation
Signs you need it
Your property is open to the street, you need to keep vehicles or children in, or the house has never had a defined entry point at the driveway.
What it costs in Longwood
A driveway gate in Longwood runs $1,800 to $4,500 for a manual gate, or $3,200 to $7,500 once automation, safety sensors, and a keypad are added.
How we do it
We measure the driveway width and grade, choose a gate style that fits the house, pour or reinforce the post footings, and hang the gate so it swings or slides cleanly without dragging.
What Gate Installation Costs in Longwood
| Item | Typical range in Longwood |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $4,500 |
| Automatic gate system (operator, loops, remotes) | $3,200 – $7,500 |
| Heavy or decorative steel gate | $4,000 – $7,500 |
How long does a gate installation take in Longwood?
Most installations take two to four days, depending on whether we’re pouring new footings or working with existing posts, and whether HOA approval is already in hand. Wet summer weather can add a day.
Do Longwood HOAs require approval for a new gate?
Many Longwood communities, especially Alaqua Lakes and Wingfield, require architectural review before a gate goes in. We’ve worked through enough of those reviews to know what boards ask for, and we can supply drawings and material specs.
Brands We Service in Longwood
We service FAAC, BFT, Linear, and Viking equipment in Longwood, plus five other major gate brands, and we keep common boards, capacitors, and remote receivers on hand. That means a Viking swing operator or a FAAC control board usually doesn’t wait a week for parts, which matters when your gate is stuck open. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Longwood, FL
| Service | Typical range in Longwood |
|---|---|
| Gate hinge replacement | $180 – $400 |
| Gate post re-setting | $350 – $900 |
| Track and roller replacement | $250 – $700 |
| Circuit board replacement | $350 – $1,200 |
| Electric motor replacement | $500 – $1,800 |
| Safety sensor replacement | $180 – $500 |
| Remote and receiver programming | $120 – $300 |
| Manual driveway gate installation | $1,800 – $4,500 |
| Automatic gate installation | $3,200 – $7,500 |
Longwood prices push higher when a gate is heavier than standard, when HOA specs require a specific material or finish, or when storm damage has bent the frame and the panel needs realignment before it will track properly again. Whatever the final scope, you get a written price before we touch the gate, and the number doesn’t change mid-job.
Neighborhoods We Serve in Longwood
We work throughout Longwood, from the older ranch streets west of I-4 to the gated communities east of Markham Woods Road. Response time is typically within one to two business days for non-urgent calls, and we prioritize gates that are stuck open or won’t secure.
- Alaqua Lakes
- Wingfield
- Sabal Point
- Woodlands at Longwood
- Longwood Hills
Service Area – Cities Near Longwood
Villa Gate Repair serves Longwood and the surrounding Seminole County communities. We regularly work in Lake Mary, FL, Winter Springs, FL, Heathrow, FL, and Sanford, FL, covering the same housing mix from 1980s subdivisions to newer gated developments.
Serving Longwood, FL — Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Longwood
For a gate stuck open or one that won’t secure, we usually arrive within one business day. Non-urgent calls are typically scheduled within two days, and installation measures happen on a set appointment, not a same-day dispatch.
Yes, and we’re familiar with the architectural review process in several Longwood communities. We can match existing gate materials and finishes, document the repair for the board, and coordinate work so it passes review the first time.
We do, and it’s one of the more common installation jobs here. That usually means new post footings, a power run from the house or panel, and a gate selected to handle the driveway’s width and slope, which on older Longwood lots often isn’t perfectly flat.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Longwood Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Daniel Thompson"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Ruben Vargas"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Christine Chen